Exothermic Chemical Foaming Agents

Bergen International manufactures a wide range of exothermic CFAs for molding and extrusion applications.

Agent Recomendations
Molding
Extrusion
Foamazol™ 80 Recommended for applications requiring a high gas yield.
foamazol 80 chemical foming agent exothermic for plastics extrusion
foamazol exothermic cfa for plastics extrusion

Foamazol™ 81 Recommended for applications requiring a high gas yield.
foamazol 81 exothermic chemical foaming agent
foamazol exothermic high gas yield cfa

Foamazol™ 82 Recommended for applications requiring a high gas yield.
foamazol 82 exothermic chemical foaming agent
foamazol 82 high gas yield exothermic cfa

Foamazol™ 83 Recommended for applications in polystyrene that require high gas pressure.
foamazol 83 chemical foaming agent polystyrene molding
foamazol 83 polystyrene  chemical foam extrusion cfa

Foamazol™ 85 Recommended for applications in polystyrene that require high gas pressure.
foamazol 85 chemical foaming agent polystyrene molding

Foamazol™ 86 Intended for extrusion and molding applications where lower processing temperatures are used.
foamazol 86 high gas yield chemical foaming agent
foamazol 86 cfa plastics polymer resin extrusion additive

Foamazol™ 87 Recommended for wire and cable applications such as coaxial cable.
foamazol 87 exothermic wire cable chemical foaming agent molding plastic
foamazol 87 cfa exothermic wire cable extrusion of plastics polymers resins

XO-107 Intended for extrusion applications requiring good gas yields without screw plate out.
xo-107 exothermic screw plate out chemical foaming agent
XO-107 extrusion cfa additive screw plate out

XO-109 Recommended for wire and cable applications such as coaxial cable.
XO-109 exothermic chemical foaming agent
XO-109 exothermic cfa extrusion plastic polymer resin

XO-136 Intended for extrusion and molding applications where lower processing temperature are used.
XO-136 molding chemical foaming agent
XO-136 exothermic cfa extrusion

XO-230 Intended for sink mark removal and warp reduction in injection molding applications.
XO-230 exothermic chemical foaming agent sink mark removal
XO-230 exothermic cfa molding

XO-279 Recommended for applications requiring a high gas yield.
foamazol 70 chemical foaming agent extrusion
foamazol 70 fine celled foam cfa extrusion

XO-280 Recommended for applications requiring a high gas yield.
XO-280 exothermic chemical foaming agent
XO-280 exothermic cfa high gas yield

XO-281 Recommended for applications requiring a high gas yield.
XO-281 exothermic chemical foaming agent
XO-281 exothermic cfa high gas yield

XO-282 Recommended for applications requiring a high gas yield.
XO-282 exothermic chemical foaming agent
XO-282 exothermic cfa extrusion

XO-287 Intended for sink mark removal and warp reduction in injection molding applications.
XO-287 exothermic chemical foaming agent sink mark removal molding

XO-331 Intended for sink mark removal and warp reduction in injection molded applications.
XO-331 exothermic cfa molding sink mark removal
XO-331 exothermic chemical foaming agent molding warp reduction

XO-459 Recommended for ABS pipe and other profile extrusions
xo-459 ABS pipe and pprofile extrusion chemical foaming agent
xo-459 exothermic CFA ABS pipe and profile extrusion

XO-468 Designed for use in PVC profile extrusion applications
XO-468 chemical foaming agent PVC profile extrusion applications
XO-468 CFA PVC profile extrusion applications

 

Endothermic CFAs
Endothermic chemical foaming agents are chemicals that take heat away from the chemical reaction. This produces foams with a much smaller cell structure, resulting in improved appearance and better physical properties. Find an Endothermic CFA
Exothermic CFAs
Exothermic chemical foaming agents generate heat during the decomposition process. They liberate more gas per gram of foaming agent than endothermic agents and higher gas pressure. Find an Exothermic CFA
Endo/Exo Blend CFAs
Endothermic and Exothermic blends can have a synergistic effect that offers benefits over the use of either an endo or exo by themselves. Find an Endo/Exo Blend CFA
Custom Formulated CFAs
Bergen International prides itself on our ability to work with you to develop the exact blend that offers the best set of performance/cost benefits for your specific process and polymer. Find out more on custom CFAs
Request a Sample
Contact Bergen International to get a sample of endothermic, exothermic, or endo/exo blend CFA. Request a Sample